- Open Access
Engineering Corynebacterium glutamicum to produce the biogasoline isopentenol from plant biomass hydrolysates
Biotechnology for Biofuels volume 12, Article number: 41 (2019)
Many microbes used for the rapid discovery and development of metabolic pathways have sensitivities to final products and process reagents. Isopentenol (3-methyl-3-buten-1-ol), a biogasoline candidate, has an established heterologous gene pathway but is toxic to several microbial hosts. Reagents used in the pretreatment of plant biomass, such as ionic liquids, also inhibit growth of many host strains. We explored the use of Corynebacterium glutamicum as an alternative host to address these constraints.
We found C. glutamicum ATCC 13032 to be tolerant to both the final product, isopentenol, as well to three classes of ionic liquids. A heterologous mevalonate-based isopentenol pathway was engineered in C. glutamicum. Targeted proteomics for the heterologous pathway proteins indicated that the 3-hydroxy-3-methylglutaryl-coenzyme A reductase protein, HmgR, is a potential rate-limiting enzyme in this synthetic pathway. Isopentenol titers were improved from undetectable to 1.25 g/L by combining three approaches: media optimization; substitution of an NADH-dependent HmgR homolog from Silicibacter pomeroyi; and development of a C. glutamicum ∆poxB ∆ldhA host chassis.
We describe the successful expression of a heterologous mevalonate-based pathway in the Gram-positive industrial microorganism, C. glutamicum, for the production of the biogasoline candidate, isopentenol. We identified critical genetic factors to harness the isopentenol pathway in C. glutamicum. Further media and cultivation optimization enabled isopentenol production from sorghum biomass hydrolysates.
Microbial hosts used for the rapid discovery and development of metabolic pathways can have drawbacks that limit their biotechnological applications beyond the laboratory scale. These disadvantages include inhibition from components of the growth media and toxicity from metabolic intermediates or final products . Solutions to several industrially relevant parameters and host sensitivities have been described, especially in model microbes such as Escherichia coli or Saccharomyces cerevisiae [2, 3], and are increasingly considered important for scale-up in an industrial process. However, if genetic tractability does not limit the choice of host organism, it is reasonable that any microbe could be utilized as a host for the expression of a heterologous gene pathway. Rather than develop solutions for individual aspects of an industrially relevant process, we viewed the choice of a microbial host as a means to bypass product and process reagent toxicities that would be encountered in the industrial process.
Corynebacterium glutamicum is a biotechnologically relevant host that presents several ideal characteristics for scale-up, such as a rapid phenotypic adjustment in response to environmental changes (e.g., oxygen levels and substrate availability), which are major causes of performance losses in industrial scale bioreactors [4, 5]. Of particular relevance for renewable biofuel production is its capacity of simultaneously utilizing glucose and xylose, two major components of plant biomass hydrolysates [6, 7], as well as p-coumaric and ferulic acids as carbon sources [8, 9]. These factors have contributed to the development of C. glutamicum as a production host for many bioproducts [10,11,12]. As a broad category, terpene-based compounds represent a rich source of biofuels and product targets . Production of terpene compounds has been explored in C. glutamicum but reported titers currently range from 0.2 to 23 mg/L for terpenes such as pinene and β-carotene, respectively . Isopentenol (3-methyl-3-buten-1-ol) is a prominent example of a terpene compound that is desirable as both biogasoline as well as a platform chemical and has been developed in other microbial systems (e.g., E. coli) , but not in C. glutamicum.
Growth inhibitory effects of residual pretreatment reagents, used to release metabolizable carbon sources from plant biomass, is another factor to be considered in the use of renewable carbon sources. Ionic liquids (ILs) represent one such class of pretreatment reagents [16, 17] and have advantages over conventional pretreatments such as favorable sugar solubilization rates, less degradation of monosaccharides, and compatibility with downstream enzymatic processing . ILs derived from 1-ethyl-3-methylimidazolium ([C2C1im]+) are known to be toxic against several eukaryotes  and Gram-negative bacteria . New classes of ILs, such as cholinium ([Ch]+) derived ILs  and protic ILs (such as ethanolamine acetate [ETA][OAc] and diethanolamine acetate [DEOA][OAc]) are emerging as equally effective but less toxic reagents for this application . In contrast to other microbial hosts [23, 24], the physiological response of C. glutamicum has not been explored in detail to any of these ILs that remain as residual components in the biomass hydrolysate.
In this study, we explore the tolerance of C. glutamicum ATCC 13032 as a microbial platform for the heterologous mevalonate-based production pathway of isopentenol (Fig. 1). We characterized the innate tolerance of C. glutamicum to isopentenol, which is known to be toxic to other microbes , as well three classes of ILs. Using the proteomics, we identify a critical protein in the heterologous mevalonate pathway for isopentenol production. Furthermore, engineering the host strain background achieved isopentenol production in minimal defined media and IL extracted plant biomass hydrolysates in titers of 1.25 g/L and 1.1 g/L, respectively. These results highlight the potential of C. glutamicum as a sustainable production chassis to produce terpene-based biofuels and bioproducts.
C. glutamicum is tolerant to three classes of ILs and exogenous isopentenol
We examined three broad IL classes: 1-ethyl-3-methyl imidazolium ([C2C1im]+) derived; cholinium ([Ch]+) derived; and protic: ethanolamine acetate [ETA][OAc] and diethanolamine acetate [DEOA][OAc]) in different cation/anion configurations, for toxicity against C. glutamicum. The specific growth rate of C. glutamicum in the absence of any IL was 0.28 doublings per hour. C. glutamicum grown in the presence of exogenous [C2C1im][OAc] or [C2C1im][Cl] indicated that this organism was tolerant to ~ 250 mM [C2C1im]+ (Fig. 2a). Its growth rate decreased fourfold and is a three to six fold increase in tolerance of [C2C1im]+ compared to wild-type E. coli (Additional file 1A). Of the cholinium based ILs, both [Ch][Lys] and [Ch][OAc] decreased growth rate by two to fourfold at 50 mM or higher. [Ch][Lys] was inhibitory at 250 mM, while [Ch][OAc] decreased growth rate but was not inhibitory at concentrations of 150 mM and above (Fig. 2b). [Ch][Cl] was nontoxic to C. glutamicum, and no growth defect was observed, even when supplemented to 600 mM (Fig. 2b). In contrast, E. coli was highly sensitive to [Ch][Lys], as it was inviable when [Ch][Lys] was added to the growth media at 40 mM (Additional file 1B). Ethanolamine- and diethanolamine-based ILs did not show a dosage dependent inhibition on C. glutamicum growth (Fig. 2c), suggesting that at tested concentrations these two representative protic ILs have no deleterious impact on C. glutamicum growth. As the concentration of ILs is below 100 mM in many commonly used hydrolysate preparations [26, 27], these results indicated that wild-type C. glutamicum was innately tolerant to most forms of the trace ILs remaining in extracted hydrolysates from biomass. No further optimization was required to grow C. glutamicum in the presence of additional ILs from these three classes.
To examine the tolerance of C. glutamicum to isopentenol and compare it against that in E. coli (known to show toxicity to exogenous isopentenol at a concentration of 0.2% (w/v) , we monitored and counted formation of colony forming units (CFUs) on agar plates. We confirmed that E. coli is inviable in the presence of 0.2% (w/v) isopentenol (Fig. 2d). In contrast, C. glutamicum is unperturbed at this concentration of isopentenol, as we observe a similar number of CFUs, albeit smaller and slower growing (Fig. 2d, compare the growth of LB plate to LB plus 0.2% (w/v) isopentenol plate). Wild-type C. glutamicum does not consume exogenous isopentenol in liquid cultures as detected by GC-FID after 24 or 48 h (Additional file 1C), where the decrease in isopentenol concentration was comparable to isopentenol evaporation in a side-by-side comparison (Additional file 1C). Isopentenol evaporation was dependent on the cultivation format and was more pronounced in a 24-well deep well plate format (Additional file 1D). These results indicated that C. glutamicum has a higher tolerance of exogenous isopentenol compared to E. coli and also that C. glutamicum does not consume this final product as a carbon source. Together, these results suggested that selecting C. glutamicum as the microbial chassis is justified due to its inherent tolerance for a suite of relevant biofuel-related molecules.
Media, carbon and nitrogen levels dramatically impact isopentenol titers in C. glutamicum
Next, we expressed a heterologous mevalonate-based isopentenol biosynthesis pathway  in C. glutamicum (Fig. 1). Acetyl-coA is converted to mevalonate-phosphate by four enzymatic reactions, which in turn is decarboxylated to isopentenyl monophosphate (a promiscuous activity from PMD). Isopentenyl monophosphate is then spontaneously dephosphorylated by an endogenous phosphatase to yield isopentenol (Fig. 1). To identify the cultivation conditions for optimal production of isopentenol in C. glutamicum, we tested M9 and CGXII media, a C. glutamicum specific minimal media as well as LB (Lysogeny Broth), and conditions were determined based on previous studies for non-native metabolite production . We detected robust isopentenol production in CGXII media, at ~ 250 mg/L after 24 h and ~ 380 mg/L after 48 h (Additional file 2A). However, no isopentenol was detected when the strain was grown in either M9 media or LB irrespective of the additional d-glucose supplementation from 1% (w/v) to 4% (w/v) (Additional file 2A, B). The d-glucose concentration was an apparent difference between the CGXII medium and the other media. These observations demonstrated that the starting d-glucose concentration alone is insufficient to induce isopentenol production in C. glutamicum and growth in M9 or LB inhibits the production of isopentenol. This result is in contrast to E. coli, where production of isopentenol (and terpenes in general) is typically robust under nutrient-rich conditions, but limited under minimal media conditions [13, 15].
To examine the role of initial d-glucose concentration for production in CGXII media, we supplemented the medium with a range of starting d-glucose concentrations [0.25% to 10% (w/v)] and repeated the isopentenol production (Fig. 3a). No isopentenol was detectable in the strains grown with less than 2% of initial d-glucose (Fig. 3a). Above 4% of d-glucose, we detected close to ~ 450 mg/L of isopentenol titers after 48 h of induction (Fig. 3a). The isopentenol titers were comparable up to 8% of d-glucose but dropped threefold down to 100 mg/L at 10% of d-glucose (Fig. 3a). Under conditions where isopentenol production was detected, C. glutamicum strains first accumulated both lactate and acetate at the 24 h timepoint, and continued to accumulate additional acetate at the 48 h timepoint (Fig. 3b, c). The measured d-glucose concentration using HPLC indicated that it was completely consumed after 24 h in the strains grown with less than 4% d-glucose, but partially remained when they were grown with 4% or higher initial d-glucose concentration, even after 48 h (Additional file 3A). The isopentenol production strains also produced 1 g/L of succinate, which did not change appreciably over the range of initial d-glucose (Additional file 3B). While there were differences in OD600 values among these strains cultured in different initial d-glucose concentrations, there was no correlation between culture density with isopentenol titer, as r2 = 0.00053 (Additional file 3C). These results confirm that the starting d-glucose concentration can impact batch-mode production of isopentenol using C. glutamicum. A twofold change in the initial d-glucose concentration can have a 30-fold impact on isopentenol titer.
Next, we examined if the initial nitrogen concentration also influenced isopentenol titer. The nitrogen concentration in CGXII media was varied (the ratio of ammonium sulfate and urea were kept the same) and the d-glucose concentration was held constant at the standard 4% d-glucose (222 mM). There was a decrease in isopentenol titer as we varied the initial nitrogen concentration in either direction from the standard of 151 mM ammonium sulfate with 83.3 mM urea  (Additional file 3D). Historically, the carbon:nitrogen ratio (C:N ratio) is known to impact the detectable levels of metabolites in log phase cultures . The C:N ratio in the published CGXII media is 2.8 (6 × 222 mM d-glucose/2 × 151 mM ammonium sulfate plus 2 × 83.3 mM urea). We combined the data for isopentenol production when we varied either nitrogen or d-glucose and re-plotted isopentenol production as a function of the C:N ratio (Additional file 3E). The optimal C:N ratio in CGXII media was between 2.8 and 4.3. The C:N ratio in M9 media is considerably higher at 17.8 (6 × 55.5 mM d-glucose/18.7 mM ammonium chloride), as the nitrogen concentration is 25-fold lower. This ratio may contribute to the differences in measured isopentenol production, since no production in M9 media was observed (Additional file 2A). These results illustrated that in terms of the C:N ratio, the observed isopentenol titer was limited to a defined concentration range in which strains could produce detectable isopentenol titers.
Blocking organic acid formation yields limited improvements to isopentenol titer
Acetate and lactate formation increased under the cultivation conditions we used for isopentenol production (Fig. 3a–c). To test if isopentenol titer could be improved by blocking formation of these organic acids, we targeted the genes encoding pyruvate oxidase (poxB) or lactate dehydrogenase (ldhA) for deletion. We generated the single mutant strains ∆poxB and ∆ldhA, as well as a double mutant strain ∆poxB ∆ldhA to redirect flux away from either or both acetate or lactate. Resulting strains were then transformed with the isopentenol production plasmid. The wild-type C. glutamicum produced ~ 225 mg/L at the 24 h timepoint, which was slightly lower than previous production runs with this strain but within the error range, likely due to batch to batch variation in media preparation (Fig. 4). The ∆poxB mutant did not significantly improve isopentenol titer (Fig. 4), even though accumulation of acetate was reduced from 5 g/L down to ~ 35 mg/L. The ∆ldhA strain did not produce more than trace isopentenol (Fig. 4). The ∆poxB ∆ldhA strain continued to show marked improvement over the wild-type strain at the 48 h timepoint, producing ~ 500 mg/L isopentenol in the ∆poxB ∆ldhA strain (Fig. 4). The rational gene deletions in C. glutamicum lowered accumulation of side-products, but improvements to isopentenol titer were limited to at most a twofold increase.
Expression of the isopentenol pathway protein HmgR strongly correlates with isopentenol titer
To examine if isopentenol titers correlate with pathway protein expression, we used selected reaction monitoring (SRM) based proteomics [32,33,34] to assess relative protein levels across these conditions. Samples were grown in LB, M9, or CGXII media and collected at 24 and 48 h timepoints for proteomic analysis and GC analysis. We observed a similar dependence on the initial d-glucose concentration in CGXII media and a failure to produce isopentenol in M9 or LB irrespective of cultivation format (Additional file 4A). Crude lysates were prepared for peptide analysis to quantify the five proteins constituting the isopentenol pathway.
The targeted protein analysis indicated the highest protein abundance in the optimal condition (CGXII with 3% d-glucose), whereas in LB, all proteins in the isopentenol production pathway were reduced in their abundance ranging from twofold (PMD) to tenfold (HmgR) lower (Fig. 5a and Additional file 4B). Pathway proteins from C. glutamicum grown in M9 media were reduced even further, as protein enrichment was decreased from sevenfold (PMD) to 27-fold (HmgS) (Fig. 5a and Additional file 4B). This analysis suggests that the failure to produce isopentenol in either LB or M9 media was due to the decreased abundance of the isopentenol pathway proteins.
Proteomics data also revealed potential bottlenecks in the isopentenol production pathway. Across the range of cultivation parameters and timepoints tested in wild-type C. glutamicum, we observed that HmgR protein levels and its isopentenol production titer were strongly correlated (r2 = 0.93) (Fig. 5b). The other four pathway proteins (AtoB, HmgS, MK, and PMD) were weakly correlated with the isopentenol titer (Additional file 4C).
To test if higher expression levels of HMGR could improve isopentenol production, we built a set of strains in which the isopentenol production pathway was chromosomally integrated at the idsA locus. The ∆idsA strains form white colonies instead of the wild-type yellow color  facilitating screening for heterologous pathway integration. The control ∆idsA strain harboring a plasmid-borne isopentenol production pathway produces ~ 20 mg/L isopentenol (Fig. 5c). The ∆idsA strain with a chromosomally integrated isopentenol pathway was able to produce isopentenol, but less than the control strain with the plasmid-borne isopentenol pathway, at titers of ~ 12 mg/L (Fig. 5c). However, when HmgR expression was augmented in the chromosomally integrated production strain with an additional, plasmid-borne copy of HMGR under a trc promoter, the isopentenol titer improved 4× over the original strain and produced 60 mg/L isopentenol. While the cause of lower isopentenol production in the ∆idsA strains remain unclear, these results provide evidence consistent with the hypothesis where HmgR is a rate-limiting step in isopentenol production and provided a target for further pathway optimization.
Production of isopentenol in C. glutamicum using IL-pretreated sorghum
To test this process with industrially relevant carbon sources, we demonstrated that C. glutamicum could produce isopentenol from plant biomass hydrolysate. We pretreated sorghum biomass using the IL [Ch][Lys] to generate a hydrolysate that contained 29.2 g/L d-glucose, 16.4 g/L d-xylose, and 5.1 g/L acetic acid (Additional file 5A, B). This hydrolysate also contained 0.01 mM 4-hydroxybenzoic acid and 1.36 mM benzoic acid (Additional file 5A, B). When the production strains were grown in the hydrolysate-amended CGXII media, no significant growth defect was observed compared to the growth in pure d-glucose supplemented CGXII media. Substituting hydrolysate for all added water in CGXII media results in a starting concentration of d-glucose at 1.7% (w/v). Based on our observations in Fig. 3a, we also prepared two other production conditions, where we supplemented pure d-glucose such that the concentration was increased to 3.5% or 4.0% (w/v). In the original hydrolysate-amended condition (with 1.7% d-glucose), we detected trace isopentenol production of ~ 15 mg/L (Fig. 6a). When the d-glucose concentration was increased to 3.5% or 4.0%, the titer increased to ~ 200 mg/L (Fig. 6a). Any potential contaminants from IL treated sorghum biomass also did not completely inhibit isopentenol production at these concentrations. These results demonstrate that C. glutamicum has the capacity to function as a microbial chassis for the production of terpenes from renewable starting materials.
Ionic liquids do not inhibit isopentenol production
Corynebacterium glutamicum isopentenol production strains were tested for isopentenol production with tolerated levels of ILs (refer to Fig. 2a–c) higher than the 0.03% (w/v) remaining ILs after the ethanol/water washing regime . Specifically, IL concentrations ranged from 75 mM to 600 mM, depending on where a growth defect was observed (Fig. 2a–c). After 24 h post-induction, all strains except for [Ch][Lys] reached similar high OD600nm measurements; the [Ch][Lys] treated strains grew very poorly and did not reach saturation. Isopentenol production was measured both 24 and 48 h post-induction.
For [C2C1im][OAc], 75 mM had no impact on isopentenol production (Fig. 6b, dark blue bars). 250 mM [C2C1im][OAc] delayed isopentenol production, as no final product was recovered at 24 h, but the isopentenol titer was partially recovered at 48 h timepoint. Samples grown in the presence of [C2C1im][Cl] produced half as much isopentenol as the untreated control (Fig. 6b, light blue bars). As [Ch][Lys] was inhibitory to C. glutamicum growth (Fig. 2b), the strain failed to produce isopentenol in its presence (Fig. 6b, lime green bars). [Ch][OAc] and [Ch][Cl] had stronger effects on final product titer, decreasing isopentenol titer approximately 2–3× compared to the control, with [Ch][OAc] having a larger impact on final product titer than [Ch][Lys] (Fig. 6b, green bars). The reduction of isopentenol titer of these strains largely correlated with the severity of the growth defect, with the exception of [Ch][Cl], which exhibited no impact on doubling time but had a measurable impact on isopentenol production (refer to Fig. 2b).
In contrast to the cholinium and imidazolium based ILs, one of the protic ILs had modest effects on the production of isopentenol. Exogenous [DEOA][OAc] had a minor impact on isopentenol production (Fig. 6b, salmon pink bars), which is reasonably similar to [Ch][Cl]. However, strains grown in the presence of exogenous ethanolamine ([ETA][OAc]) had a similarly reduced titer at the 24 h timepoint, but the isopentenol titer was similar to production in the control strain when sampled at the 48 h timepoint (Fig. 6b, dark red bars). Taken together, these results indicate that C. glutamicum is competent to maintain the isopentenol titers in the presence of ILs and across several commonly used IL formats.
Both strain background engineering and pathway engineering improve isopentenol titers
Additional HMGR expression improves isopentenol production (Fig. 5c). HmgR from S. cerevisiae is a class I HmG-CoA reductase, and preferentially uses NADPH as the cofactor rather than NADH [37, 38]. The use of a class II HmG-CoA reductase from Silicibacter pomeroyi which relies on NADH as a cofactor instead of NADPH has been reported previously . We cloned the S. pomeroyi hmgr homolog into the isopentenol production plasmid and assessed isopentenol production in the ∆poxB ∆ldhA background. With the original isopentenol production pathway, C. glutamicum produces ~ 125 mg/L isopentenol with similar titers at both 24 h and 48 h timepoints (see Additional file 4A). In contrast, ∆poxB ∆ldhA strains showed a delay in initial isopentenol production, with lower production after 24 h (~ 100 mg/L) but an improvement over wild type to ~ 500 mg/L after 48 h (refer to Fig. 4).
While titers were comparable at the 24 h timepoint with either the S. cerevisiae HMGR or S. pomeroyi hmgr genes by the 48 h timepoint, the S. pomeroyi variant strains produced close to 1120 mg/L of isopentenol (Fig. 7a). At the 72 h timepoint, we detected an increase to 1250 mg/L of isopentenol relative to ~ 750 mg/L from the unmodified heterologous pathway. This improvement in isopentenol production using the pathway variant suggests that the NADH-dependent allele of HmgR was advantageous for isopentenol production in C. glutamicum.
Finally, to complete our process characterization, we assayed isopentenol production from [Ch][Lys] pretreated hydrolysate with the optimized C. glutamicum ∆poxB ∆ldhA strain harboring the NADH-dependent S. pomeroyi hmgr, in the 5 mL cultivation format. The starting d-glucose concentration was supplemented to 4% as determined to be in the range for optimal final product titer. At the 48 h timepoint, the isopentenol production titer reached ~ 1100 mg/L, equivalent to the observed titer from when pure d-glucose was used as the carbon source (Fig. 7b). Our % theoretical yield of isopentenol  from glucose was 9.7%, and % theoretical yield from sorghum hydrolysate was 8.6%. These results demonstrate the completion of our microbial bioprocess for isopentenol production in the industrially relevant organism C. glutamicum.
Different microbial hosts have innate physiological differences that make them more or less suitable for a final bioconversion process. However, it is unclear a priori what parameters dictate final product titer of a given heterologous gene pathway. Here we have evaluated the advantages of an industrially relevant microorganism, C. glutamicum, to express a non-native mevalonate pathway consisting of five-genes with the goal of producing isopentenol from IL-pretreated plant biomass. Our highest isopentenol titers with sugars derived from plant biomass are comparable to titers published in E. coli which was cultivated in rich media with pure sugars [28, 41]. We also observed that C. glutamicum was natively resistant to a wide range of toxic compounds associated with the pretreatment process (i.e., ILs) and final product (i.e., isopentenol).
Carbon and nitrogen metabolism are closely linked through energy-driven processes such as the generation of ATP. Thus, the carbon to nitrogen ratio (C:N) is a critical parameter and its effect on growth and production has been reported in variety of microbial hosts [42, 43]. This study demonstrates a relationship between initial d-glucose concentrations in CGXII media and isopentenol production, which corresponds to a C:N ratio of 2.8–4.3 where we observed isopentenol production. A link between starting d-glucose concentration and its impact on gene expression (in the context of a heterologous gene pathway) has not been described before. This compositional profile indicates that common peptone-based media such as LB (or alternatively, defined M9 media) were not optimal for our purposes. Our observations are supported by evidence in E. coli, where cells exhibit differential transcriptional RNA levels and enzyme activities under nitrogen as well as carbon limitation . However, it is still unclear how the initial cell physiology during exponential phase can impact the physiology after d-glucose exhaustion, where much of our batch-mode production occurs. A previous study also examined the impact of C:N ratio on the production of a native molecule , but testing a range of C:N values is not yet common practice when characterizing new products. The absolute starting d-glucose concentration (or C:N ratio) may be a general determinant of final product titer and could be beneficial for optimizing other heterologous gene pathways in C. glutamicum, such as for the production of the anthocyanin food colorant, cyanidin 3-O-glucoside .
Strain background engineering also played an important role in improving isopentenol titer. Having observed the undesirable formation of acetate and lactic acid in our isopentenol production experiments, we generated new strains to redirect metabolic flux away from these two organic acids. The single gene deletion strains ∆ldhA and ∆poxB did not accumulate their appropriate side-products, but also did not appreciably increase isopentenol titer. On the other hand, the isopentenol titer was increased in the double mutant (∆poxB ∆ldhA), which was a synergistic improvement over either of the single mutants. Genome-scale metabolic flux modeling and analysis  of these strains could reveal unappreciated nuances in host physiology which could inform future metabolic engineering work.
Finally, guided by proteomic analysis, pathway engineering resulted in the highest improvements in product titers to the grams per liter level. A strong correlation between the abundance of HmgR and isopentenol titer suggested HmgR as a potential rate-limiting step in this pathway. While increasing HmgR protein levels improved isopentenol production fourfold, the greatest absolute improvement of isopentenol titer was obtained by utilizing a class II NADH-dependent variant of HmgR from S. pomeroyi . We suggest that additional mutagenesis of HMGR could lead to broadly applicable improvements for other molecules derived from the mevalonate pathway.
The system developed in this study sets the stage for characterization of this platform under simulated industrial bioreactor conditions, such as the scale down approach for 1,5‐diaminopentane . In addition, technoeconomic analyses  are needed to fully understand the complex variables necessary to implement isopentenol production at an industrial scale. Currently, ILs are valuable and recycled after generating hydrolysates by extensive washing, and thus their concentration in hydrolysate is low [36, 49]. However, removal of ILs is not cost-effective in large-scale industrial applications. As they become less expensive, or used in consolidated one-pot processes [50, 51], host strains that can tolerate higher IL concentrations have the potential for an outsized impact on process cost. A higher d-glucose concentration in the hydrolysate could simplify the cultivation process we utilized for producing isopentenol from sorghum biomass hydrolysate.
This report describes the successful deployment of a heterologous mevalonate-based pathway in the Gram-positive industrial microorganism, C. glutamicum, for the production of the biogasoline candidate and commodity chemical, isopentenol. Successful production of this final product was achieved at greater than 1 g/L from both pure glucose as well as IL-pretreated sorghum hydrolysate. We highlight the intrinsic capability of C. glutamicum as a valuable industrial host through characterizing phenotypic responses to emerging IL-based pretreatment reagents, and implementing genetic engineering and process optimization for terpene production.
Materials and methods
Chemicals and reagents
All chemicals and reagents were purchased from Sigma-Aldrich (St. Louis, MO) or as otherwise indicated, and were of molecular biology grade or higher. When cells were cultivated in a microtiter dish format, plates were sealed with a gas-permeable film (Sigma-Aldrich, St. Louis, MO).
Strain and plasmid construction
All strains and plasmids used in this study are listed in Additional file 6: Table S1 and their sequences are available at http://public-registry.jbei.org. Oligo-nucleotide primers were synthesized by Integrated DNA Technologies, Inc. (San Diego, CA). Core primers used to validate genomic deletions are listed in Additional file 7: Table S2. Q5 High-Fidelity DNA Polymerase (New England Biolabs, Ipswich, MA) was used for polymerase chain reaction. Isothermal DNA assembly  was utilized to assemble plasmids using 40 nucleotide overhangs (NEBuilder HiFi DNA Assembly Master Mix, New England Biolabs, Ipswich, MA). Plasmids were constructed using chemically competent E. coli DH10β (New England Biolabs). Where indicated, the heterologous isopentenol production pathway was modified to incorporate the hmgr homolog from Silicibacter pomeroyi (NCBI: WP_011241944.1) to replace the existing gene from S. cerevisiae and the sequence was confirmed by Sanger sequencing. Integrated gene cassettes and gene deletions were confirmed by colony PCR to verify the complete excision at the targeted open reading frame using and inspected by agarose gel electrophoresis.
Sorghum biomass pretreatment and regeneration
Whole commercial-grade sorghum plants derived from Sorghum bicolor were grown, harvested, and milled in the 2017 harvest cycle by Chromatin Inc (New Deal, Texas). This biomass was pretreated with [Ch][Lys] and afterwards, enzymatically saccharified for a total time of 72 h as described elsewhere . To make CGXII amended with hydrolysate, CGXII was prepared using stock solutions of the individual components as described below. The hydrolysate was defrosted from storage at − 80 °C, filter sterilized through a 0.45-micron filter, and added in place of water in CGXII media. Detailed methods for the quantification of sugar and organic acid content is included in Additional file 8 (Additional Methods). Crystalline d-glucose was added to CGXII media with hydrolysate to increase the concentration up to 3.5% or 4% (w/v) as indicated.
Preparation of electrocompetent C. glutamicum cells
Corynebacterium glutamicum was made electrocompetent as previously described . In brief, cells were grown in NCM medium supplemented with 3% (v/v) glycine and electroporated with a Micro Pulser Electroporator (Bio-Rad Laboratories, Inc., Hercules, CA) at 10 μF, 600 Ω, and 1800 V. After electroporation cells were immediately mixed with 400 μL of BHIS broth and heat-shocked for 6 min at 46 °C. After a 2-h outgrowth at 30 °C, cells were plated on the appropriate selective media.
Growth media composition
Isopentenol production was analyzed in several different common growth media. Lysogeny broth (LB): 10 g/L tryptone, 5 g/L yeast extract, and 5 g/L NaCl. Tryptone and yeast extract were purchased from BD Biosciences (Franklin Lakes, NJ). M9 minimal medium (Sambrook and Russell, 2001): 2 g/L (NH4)2PO4, 2 g/L KH2PO4, 1 g/L K2HPO4, 1 g/L NH4Cl, 0.5 g/L NaCl, 0.06 g/L MgSO4, 1.1 g/L CaCl2, 20 mg/L thiamine, and 0.2 mg/L biotin. CGXII minimal medium [30, 55]: 20 g/L (NH4)2SO4, 5 g/L urea, 1 g/L KH2PO4, 1 g/L K2HPO4, 0.25 g/L MgSO4·7H2O, 10 mg/L CaCl2, 10 mg/L FeSO4·7H2O, 10 mg/L MnSO4·H2O, 1 mg/L ZnSO4·7H2O, 0.2 mg/L CuSO4·5H2O, 0.02 mg/L NiCl2·6H2O, 0.2 mg/L biotin, 30 mg/L 3,4-dihydroxybenzoic acid, and 21 g/L 3-morpholinopropanesulfonic acid (MOPS); pH 7.0). d-Glucose was used as a carbon source at the % (w/v) concentration as indicated.
To assess the impact of ILs on the growth of C. glutamicum, cells were first adapted to growth in CGXII media with 4% (w/v) d-glucose (described below). Then, cells were back-diluted into fresh CGXII media at a starting OD600 of 0.1 supplemented with the following ILs: 1-ethyl-3-methylimidazolium acetate ([C2C1im][OAc], also referred to as [EMIM][OAc]), 1-ethyl-3-methylimidazolium chloride ([C2C1im][Cl] also referred to as [EMIM][Cl]), cholinium acetate ([Ch][OAc]), cholinium chloride ([Ch][Cl]), cholinium lysinate ([Ch][Lys]), ethanol amine acetate [ETA][OAc], and diethanol amine acetate [DEOA][OAc] at the concentrations indicated. These cultures (100 µL volume per well) were grown at 30 °C in 96 well microtiter plates on a Synergy 4 plate reader (BioTek Instruments, Winooski VT) and shaken on the “high” setting. Optical density was tracked at a wavelength of 600 nm.
For the isopentenol toxicity assay, single colonies of C. glutamicum and E. coli were inoculated in 5 mL LB and grown overnight at 30 °C with shaking at 200 rpm. Each strain was serially diluted, inoculated on LB agar plates containing 2% (w/v) isopentenol. Photomicrographs were taken after 2 days of incubation at 30 °C.
Isopentenol consumption or evaporation
Isopentenol evaporation was quantified in a 5 mL culture tube format and 24-well deep well plate format as described in . To measure isopentenol consumption by C. glutamicum, wild-type C. glutamicum precultures were prepared in LB and back-diluted to an initial OD600 of 0.1 into fresh LB spiked with a serial dilution of the commercial standard isopentenol. Remaining isopentenol was quantified as described in the following section.
Cultivation of C. glutamicum for isopentenol production
All cells taken from − 80 °C glycerol stocks were plated on LB agar plates containing the appropriate antibiotic. A single colony was inoculated and grown overnight in 5 mL LB at 30 °C for C. glutamicum on a rotary shaker at 200 rpm. Where necessary, kanamycin was added to growth media at a final concentration of 50 μg/mL. Unless otherwise noted, all seed cultures were first inoculated for growth in culture tubes. If cells were grown in a 24-well deep well format, 2 mL of culture media was used per well. Deep well plates were incubated Infors Multitron Incubator with a 3 mm Orbital Shaking Platform shaken at 999 rpm (Bottmingen, Switzerland). When grown in a 5 mL culture tube format, 5 mL of culture media was used per cultivation. Cultures were shaken at 200 rpm on a platform shaker. All strains were cultivated under aerobic growth conditions.
When grown in rich media, the heterologous isopentenol production pathway was induced when the OD600 reached ~ 0.8 with 500 µM IPTG without adaptation. When minimal media was used, cells from a seed culture were sub-cultured twice to adapt cells to growth in the media. In brief, pre-cultured cells in LB were diluted 1:10 into minimal media and grown overnight at 30 °C with shaking at 200 rpm using deep well plates. The adapted cultures were then diluted 1:10 into fresh minimal media and grown overnight at 30 °C with the same cultivation format. After a second back dilution to allow for complete adaptation to growth in minimal media, cultures were then used for growth assays and production in minimal media. The d-glucose concentration was held constant throughout all passaging steps required for adaptation. Where hydrolysate was used as the carbon source, CGXII media was prepared, substituting the volume used for dH2O with the hydrolysate. Crystalline d-glucose was added to this solution to increase the starting d-glucose concentration. The isopentenol production pathway was induced at the same OD600 as with rich media, and with the same concentration of IPTG at 500 µM unless otherwise indicated.
To assess isopentenol production under IL stress conditions, the adapted cultures of C. glutamicum were first back-diluted to OD600 of 0.1 into CGXII minimal medium including 4% (w/v) d-glucose and the ILs at the concentrations described above. The production pathway was then induced as before when cultures reached an OD600 of ~ 0.8.
Analytical methods for isopentenol quantification
To quantify isopentenol, 300 μL of cell culture was added to 300 μL of ethyl acetate containing n-butanol (10 μg/L) as an internal standard and processed as described previously . Briefly, sample mixtures were shaken at maximum speed for 15 min using an MT-400 microtube mixer (TOMY Seiko, Tokyo, Japan) and then centrifuged at 14,000g for 3 min to separate the organic phase from the aqueous phase. 60 μL of the organic layer was transferred into an Agilent glass insert placed inside of a GC vial and 1 μL was analyzed by Agilent GCMS equipped with a DB-5 column (Agilent Technologies, Santa Clara, CA) or Thermo GC-FID equipped with a DB-WAX column (Agilent Technologies) for quantification of isopentenol. Analytical grade standards were used to calculate analyte concentrations and confirm identification of peaks. Sugars and organic acids were quantified exactly as described in .
Reported isopentenol titers from experiments conducted in the 24-well deep well plate were corrected for evaporation at the 48 h timepoint by accounting for the amount of product lost from the 24 h timepoint. The reported isopentenol titers for the 48 h timepoint are the sum of the amount detected by GC analysis plus the estimated isopentenol lost from the 24 h timepoint. Product loss from evaporation was estimated using a fitted logarithmic curve from the evaporation rates determined in Additional file 1D with different isopentenol starting concentrations after 24 h incubation. The formula used was y = − 0.129ln(x) + 1.5375 and r2 = 0.9833.
A targeted SRM (selected reaction monitoring) method was developed to quantify relative levels of pathway proteins in samples under the various tested conditions in a 5 mL cultivation format. At the timepoints indicated, 1 mL of each sample was pelleted by centrifugation at 14,000g and flash frozen with liquid nitrogen at − 80 °C until ready for processing. Cells were lysed in 100 mM NaHCO3 using 0.1 mm glass beads using a Biospec Beadbeater (Biospec Products, Bartlesville, OK) with 60 s bursts at maximum power and repeated three times. Cell lysates were cooled on ice between each round. The clarified supernatant was harvested by centrifugation at 14,000g and the soluble protein concentration was determined with the BCA method (ThermoFisher Scientific/Pierce Biotechnology, Waltham, MA). The SRM-targeted proteomic assays and analyses were performed as described previously , on an Agilent 6460 QQQ mass spectrometer system coupled with an Agilent 1290 UHPLC system (Agilent Technologies, Santa Clara, CA). Equal amount (20 μg) of peptides in each sample were loaded and separated on an Ascentis Express Peptide C18 column [2.7-mm particle size, 160-Å pore size, 5-cm length × 2.1-mm inside diameter (ID), coupled to a 5-mm × 2.1-mm ID guard column with the same particle and pore size, operating at 60 °C; Sigma-Aldrich] operating at a flow rate of 0.4 mL/min via the following gradient: initial conditions were 98% solvent A (0.1% formic acid), 2% solvent B (99.9% acetonitrile, 0.1% formic acid). Solvent B was increased to 35% over 6.5 min, then increased to 80% over 1.5 min, and held for 1.5 min at a flow rate of 0.6 mL/min, followed by a ramp back down to 2% of B over 0.5 min where it was held for 1 min to re-equilibrate the column to original conditions. The data were acquired using Agilent MassHunter version B.08.02. Acquired SRM data were analyzed by Skyline software version 3.70 (MacCoss Lab Software). The SRM methods and data are available at Panoramaweb  (https://goo.gl/GgQGns). Peptide abundances of the same protein were summed together to assign the protein abundance of a given protein. The average protein value is shown from samples in biological triplicate to assess different timepoints and growth conditions.
selected reaction monitoring
Mukhopadhyay A. Tolerance engineering in bacteria for the production of advanced biofuels and chemicals. Trends Microbiol. 2015;23(8):498–508.
Deparis Q, Claes A, Foulquié-Moreno MR, Thevelein JM. Engineering tolerance to industrially relevant stress factors in yeast cell factories. FEMS Yeast Res. 2017;17(4):1–16. https://0-doi-org.brum.beds.ac.uk/10.1093/femsyr/fox036.
Jullesson D, David F, Pfleger B, Nielsen J. Impact of synthetic biology and metabolic engineering on industrial production of fine chemicals. Biotechnol Adv. 2015;33(7):1395–402.
Käß F, Prasad A, Tillack J, Moch M, Giese H, Büchs J, et al. Rapid assessment of oxygen transfer impact for Corynebacterium glutamicum. Bioprocess Biosyst Eng. 2014;37(12):2567–77.
Limberg MH, Schulte J, Aryani T, Mahr R, Baumgart M, Bott M, et al. Metabolic profile of 1,5-diaminopentane producing Corynebacterium glutamicum under scale-down conditions: blueprint for robustness to bioreactor inhomogeneities. Biotechnol Bioeng. 2017;114(3):560–75.
Kawaguchi H, Vertes AA, Okino S, Inui M, Yukawa H. Engineering of a xylose metabolic pathway in Corynebacterium glutamicum. Appl Environ Microbiol. 2006;72(5):3418–28.
Dutta T, Papa G, Wang E, Sun J, Isern NG, Cort JR, et al. Characterization of lignin streams during bionic liquid-based pretreatment from grass, hardwood, and softwood. ACS Sustain Chem Eng. 2018;6(3):3079–90.
Rodriguez A, Salvachúa D, Katahira R, Black BA, Cleveland NS, Reed M, et al. Base-catalyzed depolymerization of solid lignin-rich streams enables microbial conversion. ACS Sustain Chem Eng. 2017;5(9):8171–80.
Kallscheuer N, Vogt M, Kappelmann J, Krumbach K, Noack S, Bott M, et al. Identification of the phd gene cluster responsible for phenylpropanoid utilization in Corynebacterium glutamicum. Appl Microbiol Biotechnol. 2016;100(4):1871–81.
Zhao N, Qian L, Luo G, Zheng S. Synthetic biology approaches to access renewable carbon source utilization in Corynebacterium glutamicum. Appl Microbiol Biotechnol. 2018;102:9517–29.
Hermann T. Industrial production of amino acids by coryneform bacteria. J Biotechnol. 2003;104(1–3):155–72.
Becker J, Wittmann C. Bio-based production of chemicals, materials and fuels—Corynebacterium glutamicum as versatile cell factory. Curr Opin Biotechnol. 2012;23(4):631–40.
Peralta-Yahya PP, Ouellet M, Chan R, Mukhopadhyay A, Keasling JD, Lee TS. Identification and microbial production of a terpene-based advanced biofuel. Nat Commun. 2011;2:483.
Heider SAE, Wendisch VF. Engineering microbial cell factories: metabolic engineering of Corynebacterium glutamicum with a focus on non-natural products. Biotechnol J. 2015;10(8):1170–84.
George KW, Thompson MG, Kang A, Baidoo E, Wang G, Chan LJ, et al. Metabolic engineering for the high-yield production of isoprenoid-based C(5) alcohols in E. coli. Sci Rep. 2015;5:11128.
Li C, Knierim B, Manisseri C, Arora R, Scheller HV, Auer M, et al. Comparison of dilute acid and ionic liquid pretreatment of switchgrass: biomass recalcitrance, delignification and enzymatic saccharification. Biores Technol. 2010;101(13):4900–6.
George A, Brandt A, Tran K, Zahari SMNS, Klein-Marcuschamer D, Sun N, et al. Design of low-cost ionic liquids for lignocellulosic biomass pretreatment. Green Chem. 2015;17(3):1728–34.
Li C, Knierim B, Manisseri C, Arora R, Scheller HV, Auer M, et al. Comparison of dilute acid and ionic liquid pretreatment of switchgrass: biomass recalcitrance, delignification and enzymatic saccharification. Bioresour Technol. 2010;101(13):4900–6.
Dickinson Q, Bottoms S, Hinchman L, McIlwain S, Li S, Myers CL, et al. Mechanism of imidazolium ionic liquids toxicity in Saccharomyces cerevisiae and rational engineering of a tolerant, xylose-fermenting strain. Microb Cell Fact. 2016;15:17.
Ghanem OB, Mutalib MI, El-Harbawi M, Gonfa G, Kait CF, Alitheen NB, et al. Effect of imidazolium-based ionic liquids on bacterial growth inhibition investigated via experimental and QSAR modelling studies. J Hazard Mater. 2015;297:198–206.
Liu Q-P, Hou X-D, Li N, Zong M-H. Ionic liquids from renewable biomaterials: synthesis, characterization and application in the pretreatment of biomass. Green Chem. 2012;14(2):304–7.
Tang S, Baker GA, Zhao H. Ether-and alcohol-functionalized task-specific ionic liquids: attractive properties and applications. Chem Soc Rev. 2012;41(10):4030–66.
Higgins DA, Young MK, Tremaine M, Sardi M, Fletcher JM, Agnew M, et al. Natural variation in the multidrug efflux pump SGE1 underlies ionic liquid tolerance in yeast. Genetics. 2018;210(1):219–34.
Eng T, Demling P, Herbert RA, Chen Y, Benites V, Martin J, et al. Restoration of biofuel production levels and increased tolerance under ionic liquid stress is enabled by a mutation in the essential Escherichia coli gene cydC. Microb Cell Fact. 2018;17(1):159.
Foo JL, Jensen HM, Dahl RH, George K, Keasling JD, Lee TS, et al. Improving microbial biogasoline production in Escherichia coli using tolerance engineering. MBio. 2014;5(6):e01932.
Ouellet M, Datta S, Dibble DC, Tamrakar PR, Benke PI, Li C, et al. Impact of ionic liquid pretreated plant biomass on Saccharomyces cerevisiae growth and biofuel production. Green Chem. 2011;13(10):2743–9.
Zhao H, Jones CL, Baker GA, Xia S, Olubajo O, Person VN. Regenerating cellulose from ionic liquids for an accelerated enzymatic hydrolysis. J Biotechnol. 2009;139(1):47–54.
Kang A, George KW, Wang G, Baidoo E, Keasling JD, Lee TS. Isopentenyl diphosphate (IPP)-bypass mevalonate pathways for isopentenol production. Metab Eng. 2016;34:25–35.
Smith KM, Cho KM, Liao JC. Engineering Corynebacterium glutamicum for isobutanol production. Appl Microbiol Biotechnol. 2010;87(3):1045–55.
Keilhauer C, Eggeling L, Sahm H. Isoleucine synthesis in Corynebacterium glutamicum: molecular analysis of the ilvB-ilvN-ilvC operon. J Bacteriol. 1993;175(17):5595–603.
Lowry OH, Carter J, Ward JB, Glaser L. The effect of carbon and nitrogen sources on the level of metabolic intermediates in Escherichia coli. J Biol Chem. 1971;246(21):6511–21.
Gulcicek EE, Colangelo CM, McMurray W, Stone K, Williams K, Wu T, et al. Proteomics and the analysis of proteomic data: an overview of current protein-profiling technologies. Curr Protoc Bioinformatics. 2005;10:13.
Lange V, Picotti P, Domon B, Aebersold R. Selected reaction monitoring for quantitative proteomics: a tutorial. Mol Syst Biol. 2008;4(1):222.
Redding-Johanson AM, Batth TS, Chan R, Krupa R, Szmidt HL, Adams PD, et al. Targeted proteomics for metabolic pathway optimization: application to terpene production. Metab Eng. 2011;13(2):194–203.
Heider SA, Peters-Wendisch P, Beekwilder J, Wendisch VF. IdsA is the major geranylgeranyl pyrophosphate synthase involved in carotenogenesis in Corynebacterium glutamicum. FEBS J. 2014;281(21):4906–20.
Konda NM, Shi J, Singh S, Blanch HW, Simmons BA, Klein-Marcuschamer D. Understanding cost drivers and economic potential of two variants of ionic liquid pretreatment for cellulosic biofuel production. Biotechnol Biofuels. 2014;7:86.
Lawrence C, Chi Y-I, Rodwell V, Stauffacher C. Crystallization of HMG-CoA reductase from Pseudomonas mevalonii. Acta Crystallogr D Biol Crystallogr. 1995;51(3):386–9.
Ma SM, Garcia DE, Redding-Johanson AM, Friedland GD, Chan R, Batth TS, et al. Optimization of a heterologous mevalonate pathway through the use of variant HMG-CoA reductases. Metab Eng. 2011;13(5):588–97.
Meadows AL, Hawkins KM, Tsegaye Y, Antipov E, Kim Y, Raetz L, et al. Rewriting yeast central carbon metabolism for industrial isoprenoid production. Nature. 2016;537(7622):694–7.
Ajikumar PK, Xiao WH, Tyo KE, Wang Y, Simeon F, Leonard E, et al. Isoprenoid pathway optimization for Taxol precursor overproduction in Escherichia coli. Science. 2010;330(6000):70–4.
Zheng Y, Liu Q, Li L, Qin W, Yang J, Zhang H, et al. Metabolic engineering of Escherichia coli for high-specificity production of isoprenol and prenol as next generation of biofuels. Biotechnol Biofuels. 2013;6(1):57.
Ginésy M, Rusanova-Naydenova D, Rova U. Tuning of the carbon-to-nitrogen ratio for the production of l-arginine by Escherichia coli. Fermentation. 2017;3(4):60.
Wang G, Bai T, Miao Z, Ning W, Liang W. Simultaneous production of single cell oil and fumaric acid by a newly isolated yeast Aureobasidium pullulans var. aubasidani DH177. Bioprocess Biosyst Eng. 2018;41(11):1707–16.
Hua Q, Yang C, Oshima T, Mori H, Shimizu K. Analysis of gene expression in Escherichia coli in response to changes of growth-limiting nutrient in chemostat cultures. Appl Environ Microbiol. 2004;70(4):2354–66.
He N, Li Y, Chen J. Production of a novel polygalacturonic acid bioflocculant REA-11 by Corynebacterium glutamicum. Biores Technol. 2004;94(1):99–105.
Zha J, Zang Y, Mattozzi M, Plassmeier J, Gupta M, Wu X, et al. Metabolic engineering of Corynebacterium glutamicum for anthocyanin production. Microb Cell Fact. 2018;17(1):143.
Xu P, Ranganathan S, Fowler ZL, Maranas CD, Koffas MA. Genome-scale metabolic network modeling results in minimal interventions that cooperatively force carbon flux towards malonyl-CoA. Metab Eng. 2011;13(5):578–87.
Cui X, Kavvada O, Huntington T, Scown CD. Strategies for near-term scale-up of cellulosic biofuel production using sorghum and crop residues in the US. Environ Res Lett. 2018;13(12):124002.
Dibble DC, Li C, Sun L, George A, Cheng A, Çetinkol ÖP, et al. A facile method for the recovery of ionic liquid and lignin from biomass pretreatment. Green Chem. 2011;13(11):3255–64.
Shi J, Gladden JM, Sathitsuksanoh N, Kambam P, Sandoval L, Mitra D, et al. One-pot ionic liquid pretreatment and saccharification of switchgrass. Green Chem. 2013;15(9):2579–89.
Frederix M, Mingardon F, Hu M, Sun N, Pray T, Singh S, et al. Development of an E. coli strain for one-pot biofuel production from ionic liquid pretreated cellulose and switchgrass. Green Chemistry. 2016;18(15):4189–97.
Gibson DG, Young L, Chuang RY, Venter JC, Hutchison CA 3rd, Smith HO. Enzymatic assembly of DNA molecules up to several hundred kilobases. Nat Methods. 2009;6(5):343–5.
Sun N, Parthasarathi R, Socha AM, Shi J, Zhang S, Stavila V, et al. Understanding pretreatment efficacy of four cholinium and imidazolium ionic liquids by chemistry and computation. Green Chem. 2014;16(5):2546–57.
Ruan Y, Zhu L, Li Q. Improving the electro-transformation efficiency of Corynebacterium glutamicum by weakening its cell wall and increasing the cytoplasmic membrane fluidity. Biotechnol Lett. 2015;37(12):2445–52.
Unthan S, Grünberger A, van Ooyen J, Gätgens J, Heinrich J, Paczia N, et al. Beyond growth rate 0.6: What drives Corynebacterium glutamicum to higher growth rates in defined medium. Biotechnol Bioeng. 2014;111(2):359–71.
Goh EB, Baidoo EEK, Burd H, Lee TS, Keasling JD, Beller HR. Substantial improvements in methyl ketone production in E. coli and insights on the pathway from in vitro studies. Metab Eng. 2014;26:67–76.
Batth TS, Singh P, Ramakrishnan VR, Sousa MML, Chan LJG, Tran HM, et al. A targeted proteomics toolkit for high-throughput absolute quantification of Escherichia coli proteins. Metab Eng. 2014;26:48–56.
Sharma V, Eckels J, Taylor GK, Shulman NJ, Stergachis AB, Joyner SA, et al. Panorama: a targeted proteomics knowledge base. J Proteome Res. 2014;13(9):4205–10.
Conceptualization of the project: AM, TE, YS. Strain construction, molecular biology, analytical chemistry: YS, TE, RH, JT, YC, CJP. Interpreted results: YS, TE, AM, YC, CJP, BS. Contributed critical reagents: TE, YS, JT, BS. Drafted the manuscript: TE, YS, AM. All authors contributed feedback to the manuscript for publication. All authors read and approved the final manuscript.
We thank James Sun (LBNL) for sharing the ionic liquids used in this study, Mona Mirsiaghi for technical training and guidance, and the Advanced Biofuels and Bioproducts Process Development Unit (ABPDU) at LBNL for technical assistance. The cholinium lysinate pretreated sorghum hydrolysate was prepared at the ABPDU. The United States Government retains and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a nonexclusive, paid-up, irrevocable, worldwide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes.
The authors declare that they have no competing interests.
Availability of data and materials
All data generated or analyzed during this study are included in this published article and its additional files.
Consent for publication
Ethics approval and consent to participate
This work was part of the DOE Joint BioEnergy Institute (http://www.jbei.org) supported by the US Department of Energy, Office of Science, through contract DE-AC02-05CH11231 between Lawrence Berkeley National Laboratory and the US Department of Energy. YS was supported by a Grant-in-Aid for JSPS Fellows (No. 18J10103) from the Japan Society for the Promotion of Science.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Evaluation of Production Condition and C. glutamicum Properties as the Isopentenol Production Chassis. (A-B) Growth assay of E. coli and C. glutamicum to ILs; 0–300 mM [C2C1im][OAc] and 0–40 mM [Ch][Lys] in LB in 96 well microtiter plates. (C) Analysis of isopentenol evaporation or consumption by C. glutamicum in a 5 mL cultivation format. (D) The same evaporation assay as in (C), but in a 24 well format.
Isopentenol Production in C. glutamicum Strains Cultivated in Rich vs. Minimal Media. (A) Isopentenol production in minimal media: C. glutamicum was prepared for isopentenol production in two minimal media; M9 and CGXII supplemented with either 1% or 4% d-glucose as the carbon source in 5 mL tubes. (B) Isopentenol production in rich media: C. glutamicum was prepared for isopentenol production in LB media supplemented with either 1% or 4% d-glucose as the carbon source in a 5 mL culture tube. Data shown are production 48 h after induction and is the average of biological triplicates; error bars represent standard error.
Impact of Initial Glucose and Nitrogen Concentrations On Isopentenol Production in C. glutamicum. (A) Analysis of residual d-glucose in CGXII media with a range of starting d-glucose concentrations as indicated in 24-well deep well plates. (B) Analysis of the generated succinate titer during isopentenol production in Fig. 3A. (C) Correlation of OD600 of samples grown at different d-glucose concentrations with isopentenol titer at the 24 h timepoint. Correlation was determined using linear regression for the Pearson correlation coefficient (PCC) for the two variables, and r2 = 0.00053, and is indicated with a solid black line. (D) Impact of different nitrogen concentrations on isopentenol production: C. glutamicum was cultivated for isopentenol production in CGXII media, where the nitrogen concentration was varied from 20.3 mM to 1120 mM at the fixed d-glucose concentration of 220 mM. (E) Visualization of carbon:nitrogen (C:N) ratio: The C:N ratio ranged from 0.1 to 32.8. For simplicity, the potential contribution of carbon from 3,4-dihydroxybenzoic acid was excluded from this calculation. When cultivated with 5.5 mM d-glucose in CGXII media, C. glutamicum showed poor growth. No other gross differences in biomass were noted at other conditions.
Analysis of Pathway Protein Abundance vs. Isopentenol Titer in Three Kinds of Media. (A) Left. Analysis of isopentenol titer measured in wild-type C. glutamicum. Production of isopentenol from C. glutamicum in CGXII media with d-glucose concentrations as indicated. Right. The same strain was cultivated for isopentenol production in LB with 4% d-glucose, or M9 media with 4% d-glucose. The production of isopentenol from CGXII media with 3% d-glucose is replotted from the left-hand graph for ease of comparison. The relevant media and % d-glucose are indicated below the graph. Data was generated from three independent biological replicates for each condition and the error bars indicate standard error. (B) Proteomic analysis of AtoB, HmgS, MK, and PMD protein abundances: Each protein abundance is shown at the 24 h and 48 h timepoint in wild-type C. glutamicum cultivated with 4% starting d-glucose in LB and M9 media, and 2.5–6% starting d-glucose in CGXII media. (C) Correlation between isopentenol titer and each protein abundance at the 24 h timepoint. Correlation was determined using linear regression for the Pearson correlation coefficient (PCC) for the two variables. Cultivations for proteomics samples were performed as described in “Materials and methods” section.
Determination of sugars and aromatics in hydrolysate by HPLC. (A) Left Panel. Standards for aromatics (0.5 g/L of each compound): A = 4-hydroxybenzoic acid; B = vanillic acid; C = p-coumaric acid; D = ferulic acid; E = vanillin; F = benzoic acid. Right Panel. Organic acids standards (1 g/L of each compound): G = lactic acid; H = formic acid; I = acetic acid. (B) Representative traces for aromatics and organic acids from [Ch][Lys] pretreated hydrolysate. Left Panel. Aromatics. Peaks are numbered as follows as identified in hydrolysate: 1 = 4-hydroxybenzoic acid; 2 = benzoic acid. Right Panel. Sugars and organic acids identified in hydrolysate: 3 = d-glucose; 4 = d-xylose; 5 = lactic acid; 6 = acetic acid. Concentrations of the sugars and aromatics from the [Ch][Lys] pretreated sorghum biomass were as follows. d-Glucose: 29.2 g/L; d-xylose: 16.4 g/L; acetic acid: 5.1 g/L; lactic acid: 6.69 g/L; 4-hydroxybenzoic acid: 0.0018 g/L; benzoic acid: 0.167 g/L. The analytes for vanillic acid, p-coumaric acid, ferulic acid, and vanillin were detected but below the linear range for quantification (< 1 mg/L).
Strains and plasmids used in this study.
Additional Methods. Determination of sugars, organic acids and monomeric aromatics in the hydrolysate.
About this article
Cite this article
Sasaki, Y., Eng, T., Herbert, R.A. et al. Engineering Corynebacterium glutamicum to produce the biogasoline isopentenol from plant biomass hydrolysates. Biotechnol Biofuels 12, 41 (2019). https://0-doi-org.brum.beds.ac.uk/10.1186/s13068-019-1381-3
- Corynebacterium glutamicum
- Ionic liquid pretreatment